Thin-section analysis as a tool to aid identification of palaeoearthquakes on the “slow”, active Geleen Fault, Roer Valley Graben     

Kris Vanneste  Florias Mees  Koen Verbeeck   《Tectonophysics》2008,453(1-4):94

We analyzed thin sections from two palaeoseismic trenches across the low-slip-rate Geleen Fault in the Belgian Maas River valley to help identifying the most recent large palaeoearthquake on this fault segment. In the first trench we sampled silty sediment below and above a prehistoric stone pavement that was supposedly at or near the surface at the time of the event, and subsequently thrown down. The samples below show a well-developed in situ argillic Bt soil horizon in parent sediment containing remnants of stratification, whereas the sediment above is a structureless colluvium reworked at least partly from Bt-horizon material. Below the stone pavement, we also found evidence of contorted stratification, which is in agreement with macroscopic observations of both the sediment and the stone pavement itself, and which is attributed to co-seismic soft-sediment deformation. In the second trench, we sampled a sequence of vaguely discernible soil horizons in the hanging-wall, interpreted as a buried soil profile (Bt, E, and possibly A horizons), overlain by a featureless deposit. Thin-section analysis supports the colluvial nature of the latter, and also provides evidence that both the base of this layer and the top of the poorly developed A horizon below have occupied a shallow position in a soil profile. A sample from the same depth in the footwall is composed of very different material. Instead of colluvium, we find patches of Bt soil, most likely representing the same pedogenic level as the in situ Bt horizon at larger depth in the hanging-wall, but displaced and subsequently degraded. Furthermore, thin sections confirm that vertical structures cutting this Bt horizon are sand dykes. These dykes could be traced macroscopically upward to the base of the colluvium. In both trenches, we have thus identified a stratigraphic boundary in the hanging-wall, close to the surface, separating an in situ soil below from colluvium above. We interpret this limit and the overlying colluvium as the event horizon and the colluvial wedge, respectively, of a surface-rupturing palaeoearthquake. In addition, in both cases we found evidence of soft-sediment deformation (related to liquefaction) contemporaneous with the event within the stratigraphic resolution.  相似文献   

On CO<Subscript>2</Subscript> fluid flow and heat transfer behavior in the subsurface,following leakage from a geologic storage reservoir   总被引：1，自引：0，他引：1  

Karsten Pruess 《Environmental Geology》2008,54(8):1677-1686

Geologic storage of CO₂ is expected to produce plumes of large areal extent, and some leakage may occur along fractures, fault zones, or improperly plugged pre-existing wellbores. A review of physical and chemical processes accompanying leakage suggests a potential for self-enhancement. The numerical simulations presented here confirm this expectation, but reveal self-limiting features as well. It seems unlikely that CO₂ leakage could trigger a high-energy run-away discharge, a so-called “pneumatic eruption,” but present understanding is insufficient to rule out this possibility. The most promising avenue for increasing understanding of CO₂ leakage behavior is the study of natural analogues.  相似文献   

祁阳山字型构造质疑   总被引：5，自引：1，他引：4  

柏道远  李建清  周柯军  马铁球  王先辉 《大地构造与成矿学》2008,32(3)

结合区域构造演化背景及构造变形特征,对祁阳弧形构造的形成机制进行研究。分析表明,传统山字型构造机制难以解释祁阳弧形构造的诸多特征,且前人认为变形动力来源于东西向挤压应力场,也与印支期区域构造应力场实为NWW向的构造背景不符,因此祁阳弧形构造并不属典型山字型构造。基于研究区构造活动的客观实际,提出祁阳弧形构造的可能形成机制:NW向基底隐伏断裂和NNE-NE向主干断裂分别于印支期和燕山期产生强烈左旋走滑活动,从而使区域NNE向构造线在中段产生左旋偏转成为NNW向,从而形成S形的祁阳弧形构造。这一机制可较好解释祁阳弧形构造的若干特征,如关帝庙穹窿呈NWW走向、北反射弧构造形迹不显著、北弧弧顶脱位及内弧曲率大于外弧、南弧弧顶脱位、紫云-中田-高峰串珠状穹窿的形成等。上述认识对华南地区弧形构造研究具有一定启示意义:除山字型构造作用和砥柱作用外,还应注意断裂走滑等其他构造活动对弧形构造的制约,以及多次构造活动叠加对构造形迹可能造成的影响。  相似文献   

西藏札达盆地控盆断裂有限元数值模拟   总被引：1，自引：0，他引：1  

段岩  孟宪刚  邵兆刚  朱大岗 《地质通报》2008,27(10)

札达盆地是喜马拉雅构造带中的一个山间断陷盆地,其演化过程与盆地两侧的控盆构造密切相关。对控盆断裂的构造应力场进行模拟计算,将有助于进一步深化对本区构造控盆的认识。因此,在对盆地构造地质进行详细调查的基础上,结合本区的深部地质与地球物理资料,对札达盆地控盆断裂的构造应力场进行了模拟。计算结果表明,札达盆地的演化明显受盆地两侧边界断裂的控制,札达盆地是在整体南北向挤压应力的作用下,不同块体差异隆升作用的结果。其南侧的控盆断裂为北倾的正断层,北侧的控盆断裂为南倾的逆断层,二者共同形成了南降北升的翘板式断陷盆地运动过程,是喜马拉雅地块在陆内汇聚挤压构造环境中构造应力场调整的一种方式。  相似文献   

丽江市地质灾害易发性遥感影像判译   总被引：2，自引：0，他引：2  

JIANG Qin  杨世瑜 《云南地质》2008,27(1):114-119

丽江市地质灾害多发,在滇西北旅游城市中较典型。应用遥感技术对丽江市地质灾害易发性的遥感研究,可突破传统方法,发挥宏观、综合、直观、快速特点,取得较好效果。  相似文献   

准噶尔盆地西北缘走滑断层特征及油气地质意义   总被引：4，自引：0，他引：4  

徐怀民  徐朝晖  李震华  刘得光  陈永军  刘巍 《高校地质学报》2008,14(2)

准噶尔盆地西北缘前陆冲断带构造样式复杂多样,除规模较大的逆断层外,还发育一系列北西向的走滑断层。以高分辨率三维地震资料为基础,对断裂体系分析表明克拉玛依—百口泉地区的走滑断层可分为花状走滑断层和简单走滑断层两类,二者在成因、剖面特征等方面具有明显差别。研究结果认为走滑断层对油气的运聚成藏具有重要的双重控制作用,即能作为有效的运移通道,又能够起遮挡作用而形成圈闭。  相似文献   

DNQ3型能见度仪故障分析及校准方法研究          下载免费PDF全文

卢舟  王凡  王舜  刘钟中  刘志鹏  佘菁力 《中低纬山地气象》2023,47(2):114-118

为有效提高国家气象观测站能见度数据的准确性,确保能见度自动观测连续不断,对能见度仪开展故障维修、核查校准和疑误数据质控等工作显得非常重要。该文通过DNQ3型前向散射能见度仪的硬件结构和基本工作原理的介绍,以及对一些典型故障进行分析,总结出能见度仪的检测维修流程,归纳了对应的故障解决措施,凝练出该型能见度仪的核查校准和疑误数据质控方法,为一线业务人员排查能见度仪常规维护、故障排查、运行监控等提供借鉴。  相似文献   

走滑断裂古地震探槽选址范例   总被引：1，自引：1，他引：0  

袁兆德  刘静  李占飞  邵延秀  李志刚  王鹏  王伟  姚文倩 《地质通报》2016,35(11):1807-1828

探槽选址直接决定了古地震研究的质量,且理想探槽位置具有稀缺性。在收集82篇国内外走滑断裂古地震研究论文的基础上,分析了长序列古地震探槽选址和同震位移探槽选址的构造地貌共性特征。长序列古地震探槽一般布设在断塞塘、拉分盆地、小型湖盆、闸门脊汇水一侧及比较平缓的冲洪积扇或大型冲洪积扇末端等地貌位置。这些地貌位置的共同特征是位于连续的、较高沉积速率的沉积环境,且通常富集14C测年物质。在探槽选址的过程中,不仅要对现今沉积环境,也要对其古地理环境进行评价。然而以发掘古地震同震位移为目的的探槽选址则不同,成功的研究点往往较频繁发生侵蚀和下切事件,其中冲沟是最常见的地貌标志。探槽布设以垂直和平行探槽为主,采取逐次掘进或相间平行排列的方式开挖。由于理想探槽位置的稀缺性,所以在这些优质的探槽点一定要开展长期详细地深入研究,最大限度获得古地震事件的长序列,同时也要注意新技术和新方法的应用。  相似文献   

晋中至太原城际铁路沿线地质条件分析     

张龙飞 《城市地质》2016,(3):54-58

晋中至太原城际铁路位于山西断陷带次级构造单元太原断陷盆地内,盆地内部新构造运动复杂,城际铁路沿线跨越多条第四纪隐伏活动断裂,并穿过榆次地裂缝发育地带及砂土液化区域,这些地质问题极大地影响着晋中至太原城际铁路的前期勘测选线。本文从地质构造、地层岩性、浅层地震勘探等方面对穿越城际铁路的三条活动断裂的危险性进行了分析评价,以查明断裂错动对城际铁路的影响。结合前人对榆次地裂缝的研究成果,对城际铁路附近的地裂缝发育情况进行了调查验证,以查明榆次地裂缝对城际铁路的影响。通过在城际铁路车站及车辆段布置地质钻孔,进行标贯试验、剪切波速测试,以查明城际铁路沿线工程地质条件,对沿线车站及车辆段场地进行液化判定及场地类别判定。针对城际铁路沿线存在的上述地质问题,给出了相应的工程建议,对城际铁路前期勘测设计具有重要的指导意义。  相似文献   

Hydrogen sulfide measurements in air by passive/diffusive samplers and high-frequency analyzer: A critical comparison     

《Applied Geochemistry》2016

In this study, hydrogen sulfide (H₂S) measurements in air carried out using (a) passive/diffusive samplers (Radiello^® traps) and (b) a high-frequency (60 s) real-time analyzer (Thermo^® 450i) were compared in order to evaluate advantages and limitations of the two techniques. Four different sites in urban environments (Florence, Italy) and two volcanic areas characterized by intense degassing of H₂S-rich fluids (Campi Flegrei and Vulcano Island, Italy) were selected for such measurements. The concentrations of H₂S generally varied over 5 orders of magnitude (from 10⁻¹–10³ μg/m³), the H₂S values measured with the Radiello^® traps (H₂S_R) being significantly higher than the average values measured by the Thermo^® 450i during the trap exposure (H₂S_Ta), especially when H₂S was <30 μg/m³. To test the reproducibility of the Radiello^® traps, 8 passive/diffusive samplers were contemporaneously deployed within an 0.2 m² area in an H₂S-contaminated site at Mt. Amiata (Tuscany, Italy), revealing that the precision of the H₂S_R values was ±49%. This large uncertainty, whose cause was not recognizable, is to be added to that related to the environmental conditions (wind speed and direction, humidity, temperature), which are known to strongly affect passive measurements. The Thermo^® 450i analyzer measurements highlighted the occurrence of short-term temporal variations of the H₂S concentrations, with peak values (up to 5732 μg/m³) potentially harmful to the human health. The Radiello^® traps were not able to detect such temporal variability due to their large exposure time. The disagreement between the H₂S_R and H₂S_Ta values poses severe concerns for the selection of an appropriate methodological approach aimed to provide an accurate measurement of this highly toxic air pollutant in compliance with the WHO air quality guidelines. Although passive samplers may offer the opportunity to carry out low-cost preliminary surveys, the use of the high-frequency H₂S analyzer is preferred when an accurate assessment of air quality is required. In fact, the latter provides precise real-time measurements for a reliable estimation of the effective exposure to hazardous H₂S concentrations, giving insights into the mechanisms regulating the dispersion of this air pollutant in relation to the meteorological parameters.  相似文献